Thanks
for all your help!

JB

thartman wrote:
> 
> Just by looking at your BOM (Bill of Materials) you will not be
> able to
> connect to the Telco circuit without an External CSU/DSU. The
> serial
> interfaces require this. If you would have purchased the
> VWIC-MFT-T1 then
> you would be able to handle the both the voice and data
> internal to the box.
> 
> Layer 1 - nothing else works without out it!!!!
> 
> tlh
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of J B
> Sent: Thursday, May 29, 2003 11:25 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Help with Cisco 3745 configuration [7:69765]
> 
> J B wrote:
> > 
> > John Neiberger wrote:
> > > 
> > > >>>> J B 5/29/03 8:39:15 AM >>>
> > > >Hi, Everyone
> > > >I just been awarded the responsibility of installing 4 3745
> > > Cisco routers.
> > > 
> > > >The local phone company wanted $5500 dollars for the
> > > installation and my
> > > >employer thinks is to much.  I was looking at the Cisco
> > > website for sample
> > > >configurations but I couldn't find them.  I need to share
> the
> > > T1 channels
> > > >link for voice and data.  I haven't done Cisco for like 2
> > > years.  Can
> > > >someone help me with some guidance to find some information
> > in
> > > how to do
> > > that.
> > > >
> > > >Thanks
> > > >JBary 
> > > 
> > > Are your routers handling the voice traffic or are you
> simply
> > > splitting this
> > > off at the CSU/DSU so that the router only sees data
> traffic?
> > > 
> > > John
> > > 
> > > 
> > 
> > Splitting the line with external CSU/DSU's for each site
> > Some channels for voice and the rest for data.
> > 
> > I have the following equipment: 
> > 
> > 
> > 3725 (3) Qty 
> > 3700 Series, 2-Slot, Dual FE, Multiservice Access Router 
> > Cisco 3725 Series IOS IP/IPX/APPLETALK 
> > 2-Port Serial WAN Interface Card 
> > V.35 Cable, DTE Male to Smart Serial, 10 Feet 
> > 
> > 3745 (1) Qty 
> > 
> > 3700 Series, 4-Slot, Dual FE, Multiservice Access Router 
> > Cisco 3745 Series IOS IP/IPX/APPLETALK 
> > 4-Port Serial Network Module 
> > V.35 Cable, DTE, Male, 10 Feet 
> > 
> > Jb
> > 
> I just talk to my manager and he's telling me that no CSU/DSU's
> were ordered
> because this routers are suppose to be able to do everything.
> 
> So, No external CSU's splitting of the line;  all is suppose to
> be configure
> within the Cisco IOS.
> Thanks
> JB
> 
> 




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70908&t=69765
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to