Just let them go on performance, not on command set? I remember about 400Kb/s 3des for the 806/820's the 830's should do 2Mb/s for 3des.
1700's VPN bundle carry a xtra crypto card. At least 2Mbit. Watch for the amount of VPN connections, too many access-lists's etc. (cpu power) A pix 501 or small vpn client could also do the job? Martijn -----Oorspronkelijk bericht----- Van: Herold Heiko [mailto:[EMAIL PROTECTED] Verzonden: donderdag 7 augustus 2003 11:04 Aan: Jansen, M; [EMAIL PROTECTED] Onderwerp: RE: Cisco 806 ? [7:73613] No, it is unrelated - I just remembered the 1000 series being limited (regarding at least NTP) and feared the 800 series, being the replacement for the 1000 series, could have the same limitations. Heiko -- -- PREVINET S.p.A. www.previnet.it -- Heiko Herold [EMAIL PROTECTED] -- +39-041-5907073 ph -- +39-041-5907472 fax > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 07, 2003 10:51 AM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: RE: Cisco 806 ? [7:73613] > > > What about NTP? Should it read NAT? > > Martijn > > -----Oorspronkelijk bericht----- > Van: Herold Heiko [mailto:[EMAIL PROTECTED] > Verzonden: donderdag 7 augustus 2003 8:10 > Aan: [EMAIL PROTECTED] > Onderwerp: RE: Cisco 806 ? [7:73613] > > > Thanks! > I just wanted to double check - some hears ago I got burnt in > a similar > situation, with a 1003 and (no) NTP if I remember correctly. > Heiko > > -- > -- PREVINET S.p.A. www.previnet.it > -- Heiko Herold [EMAIL PROTECTED] > -- +39-041-5907073 ph > -- +39-041-5907472 fax > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Sent: Thursday, August 07, 2003 8:04 AM > > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > Subject: RE: Cisco 806 ? [7:73613] > > > > > > It does. It is IOS. Just do your CLI thing. > > > > Martijn > > > > -----Oorspronkelijk bericht----- > > Van: Herold Heiko [mailto:[EMAIL PROTECTED] > > Verzonden: woensdag 6 augustus 2003 17:21 > > Aan: [EMAIL PROTECTED] > > Onderwerp: Cisco 806 ? [7:73613] > > > > > > Hi, > > > > for some tests I need something cheap to play with, having 2 > > eth, vpn and > > (static) nat capability. Could anybody confirm if a 806 with > > a "IP/FW PLUS > > 3DES" image does support IPSEC and NAT at the same time ? > > From the docs I'd say it does support both but can I have a > > vpn tunnel, and > > nat inside the local network, and nat outside the remote (on > > the other end > > of the tunnel) network ? > > The other endpoint would be a pix or a fw-1 although that > > shouldn't matter. > > Couldn't find any configrmation of this in the docs :( > > Thanks > > Heiko > > > > -- > > -- PREVINET S.p.A. www.previnet.it > > -- Heiko Herold [EMAIL PROTECTED] > > -- +39-041-5907073 ph > > -- +39-041-5907472 fax > > **Please support GroupStudy by purchasing from the GroupStudy Store: > > http://shop.groupstudy.com > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73653&t=73613 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
