It does. It is IOS. Just do your CLI thing. Martijn
-----Oorspronkelijk bericht----- Van: Herold Heiko [mailto:[EMAIL PROTECTED] Verzonden: woensdag 6 augustus 2003 17:21 Aan: [EMAIL PROTECTED] Onderwerp: Cisco 806 ? [7:73613] Hi, for some tests I need something cheap to play with, having 2 eth, vpn and (static) nat capability. Could anybody confirm if a 806 with a "IP/FW PLUS 3DES" image does support IPSEC and NAT at the same time ? >From the docs I'd say it does support both but can I have a vpn tunnel, and nat inside the local network, and nat outside the remote (on the other end of the tunnel) network ? The other endpoint would be a pix or a fw-1 although that shouldn't matter. Couldn't find any configrmation of this in the docs :( Thanks Heiko -- -- PREVINET S.p.A. www.previnet.it -- Heiko Herold [EMAIL PROTECTED] -- +39-041-5907073 ph -- +39-041-5907472 fax **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73642&t=73613 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html