Hi! If there is not another reason, which you didn't mention, the easiest method to solve your problem, if you do not configure NAT on PIX. In this case internal adresses will be seen by the router, so you have to configure the router to NAT the web and e-mail servers in statioc way, and to know about the network in the PIX inside interface.
By, HT! -----Original Message----- From: Michael Barnhart [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 19, 2003 5:06 AM To: [EMAIL PROTECTED] Subject: PIX and Router Setup Question [7:74141] Network is as such: Internet - 1721 - 515 PIX - Network We do not have many live IP addresses, so we want to use one on the 1721 Outside. Between the 1721 and the PIX we want to use a private network, say 192.168.1.x /24. On the inside PIX we will use the IP of the internal network (also a private address). The problem comes in how to setup the PIX to work properly. The 1721 is using NAT, and I would assume I need NAT on the PIX as well. At this point things get confusing! We are hosting a website on the internal network, as well as an email server. I want to see them from the Internet. Question is, do I need to double NAT, or is there some way to have the PIX just pass the internal network to the Router? Thanks! Michael Barnhart **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74156&t=74141 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
