Just a SWAG. Do you have VTP configured on the switch?
> -----Original Message-----
> From: John Neiberger [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 14, 2000 4:23 PM
> To: [EMAIL PROTECTED]
> Subject: 2924XL and 2600 Trunking problem
>
>
> I would swear I saw this in the archives somewhere once, but
> I could not
> find it just now. Here is the problem:
>
> I have a brand new 2600 with fast ethernet ports connected to
> a brand new
> enterprise-model 2924XL via an ISL trunk with two vlans. On
> the 2924XL, the
> VLAN1 interface is working and I can pass traffic back and
> forth between the
> switch and router. However, the VLAN2 interface will not
> come up. I keep
> typing "no shutdown" but it remains in a shutdown state.
>
> Any ideas?
>
> TIA,
> John Neiberger
>
>
>
>
>
> _______________________________________________________
> Say Bye to Slow Internet!
> http://www.home.com/xinbox/signup.html
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
