VLAN will not come up unless there is a client attached - VTP is irrelevant
in this context, onlt matters if you're using the higher end switches) ie
5X00, 6X00) and a router that supports MLS (3600 is the lowest model that I
know of - works fine though)
someone remind me what SWAG is?
HTH
ANdy
----- Original Message -----
From: John Neiberger <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 14, 2000 10:22 PM
Subject: 2924XL and 2600 Trunking problem
> I would swear I saw this in the archives somewhere once, but I could not
> find it just now. Here is the problem:
>
> I have a brand new 2600 with fast ethernet ports connected to a brand new
> enterprise-model 2924XL via an ISL trunk with two vlans. On the 2924XL,
the
> VLAN1 interface is working and I can pass traffic back and forth between
the
> switch and router. However, the VLAN2 interface will not come up. I keep
> typing "no shutdown" but it remains in a shutdown state.
>
> Any ideas?
>
> TIA,
> John Neiberger
>
>
>
>
>
> _______________________________________________________
> Say Bye to Slow Internet!
> http://www.home.com/xinbox/signup.html
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
