John,
I bet your VLAN1 is the default VLAN. Try:
"set vtp mode transparent"
Jim Xie
At 02:22 PM 08/14/2000 -0700, you wrote:
>I would swear I saw this in the archives somewhere once, but I could not
>find it just now. Here is the problem:
>
>I have a brand new 2600 with fast ethernet ports connected to a brand new
>enterprise-model 2924XL via an ISL trunk with two vlans. On the 2924XL, the
>VLAN1 interface is working and I can pass traffic back and forth between the
>switch and router. However, the VLAN2 interface will not come up. I keep
>typing "no shutdown" but it remains in a shutdown state.
>
>Any ideas?
>
>TIA,
>John Neiberger
>
>
>
>
>
>_______________________________________________________
>Say Bye to Slow Internet!
>http://www.home.com/xinbox/signup.html
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]