At the minimum, you need under the ATM interfaces:
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
Then do:
show atm ilmi-status
and you should see the prefix part of the NSAP address.
HTH,
Rog
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> James Xie
> Sent: Tuesday, August 15, 2000 4:51 PM
> To: [EMAIL PROTECTED]
> Subject: ATM configuration
>
>
> Hi,
>
> I am trying to set up an ATM LANE testing
> with one LS1010 and 2 routers with ATM
> interfaces.
>
> Does anyone know how to make the routers
> to get ATM prefix from LS1010.
>
> Thanx.
>
> Jim Xie
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]