I know ATM devices get NSAP prefix from upstream
switches through ILMI. I just need to spend more time on
debugging ILMI.
I will get back to this list later this week.
Thanx.
Jim Xie
At 10:35 AM 08/16/2000 -0400, you wrote:
>Hmmmm... interesting. You shouldn't have to do anything at the LS1010. You
>don't even need to put LECS's NSAP address in the LS1010 if you don't want
>to, or can't, in the case of the actual exam. There are other ways around
>it. But, it does look like you have other problems if you can't even get
>the NSAP prefix from the ATM switch. I'm not sure if you need to turn on
>LANE service first (on the routers) before you can see the NSAP prefix under
>"show lane default".
>
>Rog
>
>> -----Original Message-----
>> From: James Xie [mailto:[EMAIL PROTECTED]]
>> Sent: Tuesday, August 15, 2000 7:41 PM
>> To: Roger Wang
>> Cc: [EMAIL PROTECTED]
>> Subject: RE: ATM configuration
>>
>>
>> Roger,
>>
>> I did that. I need the configuraiton on the LS1010.
>>
>> Thanx.
>>
>> Jim Xie
>>
>>
>>
>> At 05:34 PM 08/15/2000 -0400, you wrote:
>> >At the minimum, you need under the ATM interfaces:
>> >
>> >atm pvc 1 0 5 qsaal
>> >atm pvc 2 0 16 ilmi
>> >
>> >Then do:
>> >
>> >show atm ilmi-status
>> >
>> >and you should see the prefix part of the NSAP address.
>> >
>> >HTH,
>> >
>> >Rog
>> >
>> >> -----Original Message-----
>> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
>> >> James Xie
>> >> Sent: Tuesday, August 15, 2000 4:51 PM
>> >> To: [EMAIL PROTECTED]
>> >> Subject: ATM configuration
>> >>
>> >>
>> >> Hi,
>> >>
>> >> I am trying to set up an ATM LANE testing
>> >> with one LS1010 and 2 routers with ATM
>> >> interfaces.
>> >>
>> >> Does anyone know how to make the routers
>> >> to get ATM prefix from LS1010.
>> >>
>> >> Thanx.
>> >>
>> >> Jim Xie
>> >>
>> >> ___________________________________
>> >> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>> >> FAQ, list archives, and subscription info: http://www.groupstudy.com
>> >> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>> >>
>> >
>> >___________________________________
>> >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>> >FAQ, list archives, and subscription info: http://www.groupstudy.com
>> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
