Jim,
The only other config on the LS1010 is the actual NSAP
address. The command is
atm address 47.0091.8100.0000.0050.736f.6a01.0050.736f.5555.00
This is in global config.
Hope this helps,
Dan
>From: James Xie <[EMAIL PROTECTED]>
>Reply-To: James Xie <[EMAIL PROTECTED]>
>To: "Daniel Beynon" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: RE: ATM configuration
>Date: Tue, 15 Aug 2000 18:01:49 -0700
>
>I did "atm lecs-address-default .........." on the LS1010.
>It doesn't help me at all.
>
>When I do "sh lane default-atm-addresses" on the router:
>
>LANE Client: ...0060092B1B00.**
>LANE Server: ...0060092B1B01.**
>LANE Bus: ...0060092B1B02.**
>LANE Config Server: ...0060092B1B03.00
>
>I don't see the NSAP prefix. I think something
>need to be done on the LS1010.
>
>Thanx.
>
>Jim Xie
>
>
>At 12:37 AM 08/16/2000 +0000, Daniel Beynon wrote:
> >Jim,
> >
> >In configuring LANE the only thing needed on the
> >LS1010 is the NSAP address on the LECS. This
> >is done with the following command pointing to the
> >router that you have chosen to be the LECS.
> >
> >atm lecs-address-default
>47.0091.8100.0000.0050.736f.6a01.00b0.c2e8.bc8f.00
> >1
> >
> >Hope that answers your question.
> >
> >
> >>From: James Xie <[EMAIL PROTECTED]>
> >>Reply-To: James Xie <[EMAIL PROTECTED]>
> >>To: "Roger Wang" <[EMAIL PROTECTED]>
> >>CC: [EMAIL PROTECTED]
> >>Subject: RE: ATM configuration
> >>Date: Tue, 15 Aug 2000 16:41:28 -0700
> >>
> >>Roger,
> >>
> >> I did that. I need the configuraiton on the LS1010.
> >>
> >>Thanx.
> >>
> >>Jim Xie
> >>
> >>
> >>
> >>At 05:34 PM 08/15/2000 -0400, you wrote:
> >> >At the minimum, you need under the ATM interfaces:
> >> >
> >> >atm pvc 1 0 5 qsaal
> >> >atm pvc 2 0 16 ilmi
> >> >
> >> >Then do:
> >> >
> >> >show atm ilmi-status
> >> >
> >> >and you should see the prefix part of the NSAP address.
> >> >
> >> >HTH,
> >> >
> >> >Rog
> >> >
> >> >> -----Original Message-----
> >> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
>Of
> >> >> James Xie
> >> >> Sent: Tuesday, August 15, 2000 4:51 PM
> >> >> To: [EMAIL PROTECTED]
> >> >> Subject: ATM configuration
> >> >>
> >> >>
> >> >> Hi,
> >> >>
> >> >> I am trying to set up an ATM LANE testing
> >> >> with one LS1010 and 2 routers with ATM
> >> >> interfaces.
> >> >>
> >> >> Does anyone know how to make the routers
> >> >> to get ATM prefix from LS1010.
> >> >>
> >> >> Thanx.
> >> >>
> >> >> Jim Xie
> >> >>
> >> >> ___________________________________
> >> >> UPDATED Posting Guidelines:
>http://www.groupstudy.com/list/guide.html
> >> >> FAQ, list archives, and subscription info: http://www.groupstudy.com
> >> >> Report misconduct and Nondisclosure violations to
>[EMAIL PROTECTED]
> >> >>
> >> >
> >> >___________________________________
> >> >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> >> >FAQ, list archives, and subscription info: http://www.groupstudy.com
> >> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >>
> >>___________________________________
> >>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> >>FAQ, list archives, and subscription info: http://www.groupstudy.com
> >>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >________________________________________________________________________
> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
