Roger,
I did that. I need the configuraiton on the LS1010.
Thanx.
Jim Xie
At 05:34 PM 08/15/2000 -0400, you wrote:
>At the minimum, you need under the ATM interfaces:
>
>atm pvc 1 0 5 qsaal
>atm pvc 2 0 16 ilmi
>
>Then do:
>
>show atm ilmi-status
>
>and you should see the prefix part of the NSAP address.
>
>HTH,
>
>Rog
>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
>> James Xie
>> Sent: Tuesday, August 15, 2000 4:51 PM
>> To: [EMAIL PROTECTED]
>> Subject: ATM configuration
>>
>>
>> Hi,
>>
>> I am trying to set up an ATM LANE testing
>> with one LS1010 and 2 routers with ATM
>> interfaces.
>>
>> Does anyone know how to make the routers
>> to get ATM prefix from LS1010.
>>
>> Thanx.
>>
>> Jim Xie
>>
>> ___________________________________
>> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>> FAQ, list archives, and subscription info: http://www.groupstudy.com
>> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
