Thanks ... i will check it out .. Regards Atif -----Original Message----- From: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Thursday, August 17, 2000 7:17 AM Subject: Re: PIX >Ive done it before with the same pix box, same software...and Ive done it >with different pix flavors and same software...they seem pretty >interchangable. I was told by Cisco that they do not recommend >interchanging pix versions for fail-overs...as long as your interfaces are >the same, I cant see there being any real problems in a lab environment. > >-B >""Atif Awan"" <[EMAIL PROTECTED]> wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... >> >> does anyone know whether a failover is a separate PIX box or is it the >same >> box with a different software ? >> >> Regards >> Atif >> >> >> ___________________________________ >> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >> FAQ, list archives, and subscription info: http://www.groupstudy.com >> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >> --- > > >___________________________________ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
