For failover you need two pix's, with the same software (version), and the same configuration of hardware (#, and type of ports), and a special cable for failover. The pin out of this cable is available in pix docummentation. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, August 17, 2000 8:26 AM Subject: RE: PIX > Hi, > > PIX's failover is the same box and the same software but different > activation key. > > GIL > CCNA CCDA > > -----Original Message----- > From: Atif Awan [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, August 16, 2000 11:24 PM > To: [EMAIL PROTECTED] > Subject: PIX > > > > does anyone know whether a failover is a separate PIX box or is it the same > box with a different software ? > > Regards > Atif > > > ___________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > This email was scanned using ESPG @ PubliCom Haifa. > > ___________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]