Hi, you need use the command of "no auto-summary", to let router support the VLSM. [EMAIL PROTECTED] wrote: > > Hi > > I have a question? I have two routers okay and I have routing turned on > both of them (EIGRP). lets say I want to use 10.1.1.0 and I want to be able > to to split this subnet into two networks, I know you can use IP subnet-zero > to do this, but I want to address the first router E0 Interface with 10.1.1.1 > to 10.1.1.126 and the second router E0 with the second half 10.1.1.127 to > 10.1.1.254 ok. Now I want to be able to ping each others gateway. > > Can I or should I be able to ping each others gateway and have one flat > segment between 2 router Ethernet segment. Do I need to bridge this? these > two segments together. > > Brian > Email Address [EMAIL PROTECTED] > > ___________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
begin: vcard fn: cisco_ccna n: ;cisco_ccna org: passion digital communication,Ltd. email;internet: [EMAIL PROTECTED] note: Internet,the best word I have met all over the world. Cisco, the real business. x-mozilla-cpt: www.pdc.com;2 x-mozilla-html: FALSE version: 2.1 end: vcard
