On Sun, 27 Aug 2000, cisco_ccna wrote:
> Hi,
>
> you need use the command of "no auto-summary", to let router support the
> VLSM.
i really don't think thats going to matter in this particular case. The
routers both are using a /25 mask and will apply that to routes
learned. If the route gets summarized, its still not a problem, since the
network is flat...........
>
> [EMAIL PROTECTED] wrote:
> >
> > Hi
> >
> > I have a question? I have two routers okay and I have routing turned on
> > both of them (EIGRP). lets say I want to use 10.1.1.0 and I want to be able
> > to to split this subnet into two networks, I know you can use IP subnet-zero
> > to do this, but I want to address the first router E0 Interface with 10.1.1.1
> > to 10.1.1.126 and the second router E0 with the second half 10.1.1.127 to
> > 10.1.1.254 ok. Now I want to be able to ping each others gateway.
> >
> > Can I or should I be able to ping each others gateway and have one flat
> > segment between 2 router Ethernet segment. Do I need to bridge this? these
> > two segments together.
> >
> > Brian
> > Email Address [EMAIL PROTECTED]
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
-----------------------------------------------
Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]