Is the rule applies to Bus topology only or applicable for any topologies ?
-SU
> -----Original Message-----
> From: Hitesh Pathak (CSD-BBYRO-RTSG) [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, August 29, 2000 5:24 AM
> To: 'Suresh Uniyal'
> Cc: '[EMAIL PROTECTED]'
> Subject: RE: 5-4-3 Rule
>
> It defines a general networking setup like if u have a single network then
> it should have 5 segments , 4 repeaters & out of 5 segments atleast 3
> should
> be populated ie. on 3 segments you should have some node connected.
>
> group , pls correct me if I'm wrong.
>
> HP
>
> > -----Original Message-----
> > From: Suresh Uniyal [SMTP:[EMAIL PROTECTED]]
> > Sent: Tuesday, August 29, 2000 4:29 PM
> > To: Cisco (E-mail)
> > Subject: 5-4-3 Rule
> >
> > Hi all,
> >
> > What is 5-4-3 rule?
> >
> > -SU
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
