you can do nat
with the ip only version of 12.x I assume that means you can do it with
any version. very handy and a good reason to upgrade all by itself.
if you don't have a service contract, 12.x ip only for a 1600 router should be
around $20 but make sure you have adequate ram and flash because it's probably
bigger
daveh
-----Original Message-----
From: Nova Rich [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 01, 2000 1:05 PM
To: '[EMAIL PROTECTED]'
Subject: RE: subinterfacesThanx guys for the help. The "secondary" command at the end was the problem.
But now I realize that the Cisco 1610 with IOS 11.2 doesn't support NAT. Does anyone know if you can do NAT on a 1600 and if, so which ver. IOS?
NovaRich