Thanks for the explanation.
What I was really asking is : Would there be a difference in the ability to
perform the inter-vlan routing function between these two types of
Fastethernet ports. '100 BaseT' Fastethernet port can perform the inter-vlan
routing. Can '10 BaseT/100 Base T' fastethernet port do the same ?
I should have asked the question differently.
Alex
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Saturday, September 02, 2000 5:33 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: ISL on sub-if
In a message dated 9/2/00 4:54:00 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
<< Is there a difference between '10BaseT/100BaseT' Fastethernet port (which
is
the Fastethernet port on 2621) vs a '100BaseT' fastethernet port ?
>>
10/100 baseT can be configured as either of the 2 speeds, where-as 100baseT
can only be configured as 100...
Mark Zabludovsky ~ CCNA, CCDA
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
