This is the 12.1.3aT1 image name of the 26XX series routers IP Plus image:
c2600-is-mz.121-3a.T1.bin Cisco recommends 16 flash and 40 Dram to run
this.
HTH
----- Original Message -----
From: Jared Carter <[EMAIL PROTECTED]>
To: Brian <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, September 02, 2000 2:23 PM
Subject: Re: ISL on sub-if
> Well, the "Plus" version seems to be what is lacking. Is there any way to
> reference the image name to what feature set it is? I searched on CCO
with
> the image name and of course found several hundred documents. Thanks,
> again.
>
> /Jared
>
> ----- Original Message -----
> From: "Brian" <[EMAIL PROTECTED]>
> To: "Jared Carter" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Saturday, September 02, 2000 2:47 PM
> Subject: Re: ISL on sub-if
>
>
> > On Sat, 2 Sep 2000, Jared Carter wrote:
> >
> > > Group-
> > >
> > > I have 2 2924 and a 2620 I am trying to practice routing between
> > > VLANs. The trunk between the switches is okay. When I create the
> > > sub-if on the router and try to run encap isl 2, it barks at me that
> > > this is an unrecognized command... ie "encapsulation" is not a valid
> > > command. I am running 12.0(3)T3 code on the router. Am I just
> > > missing something obvious?
> >
> > ISL/VLAN support is in IP Plus versions of IOS. There are versions of
> > IOS, and then there are feature sets. If you want IPX, you have to run
an
> > IPX version of 12.0(3)T3..........if you want appletalk, you have to run
> > an appletalk feature set..........and if you want VLAN/ISL, you must run
> > the "IP Plus" feature set at a minimum. Its most likely supported in
> > Enterprise and other supersets of IP Plus.
> >
> > Brian
> >
> >
> > >
> > > Thanks
> > >
> > > /Jared
> > >
> > >
> >
> > -----------------------------------------------
> > Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
> > Network Administrator
> > ShreveNet Inc. (ASN 11881)
> >
> >
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
