What's the Config of the 2621 and 4003
commands required on the 2600
int 0.x
encap dot1q <vlan#>
ip address x.x.x.x
on 4003
set trunk mod/port nonegotiate dot1q
"D. J. Jones" <[EMAIL PROTECTED]> wrote in message
8pclpa$fvs$[EMAIL PROTECTED]">news:8pclpa$fvs$[EMAIL PROTECTED]...
> I'm trying to set up a one arm router (2621) to do some intervlan routing
> using subinterfaces which I have attached to a 4003 switch. I keep
getting
> these errors:
>
> %SYS-4-P2_WARN: 1/Tag 500 on packet
> from 00:00:0c:07:ac:02 port 2/3, but port's native vlan is 1
>
>
> Anyone have any ideas??..dj
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
