If you have a VLAN implemented on a Switched environment, most switches will
bridge (i.e. do L2 switching) by default on the ports that belong to the
same VLAN.
Does it answer?
Good luck.
-----Original Message-----
From: FRS [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 03, 2000 7:44 AM
To: [EMAIL PROTECTED]
Subject: VLAN
Is it possible to bridge inside a VLAN?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
