Try setting encapsulation to "frame-relay ietf" and LMI type to "ansi" or
"ansi annex d"
-Chuck
----- Original Message -----
From: "Hans Stout" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 10, 2000 2:24 PM
Subject: Frame Relay problem
> Hi colleagues,
>
> I have a problem with my frame relay connection; the serial interface is
> up/down, and when I debug the serial interface, I can see that the
interface
> is constantly trying to restart:23w5d:
>
> Serial5/0: attempting to restart:
> --More--
> 23w5d: Serial5/0(out): StEnq, myseq 4, yourseen 0, DTE down
> --More--
> 23w5d: Serial5/0(out): StEnq, myseq 5, yourseen 0, DTE down
>
> What could be the reason for this ? I'll add the output for the sh int:
>
>
> Serial5/0 is up, line protocol is down
> Hardware is M4T
> MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation FRAME-RELAY, crc 16, loopback not set
> Keepalive set (10 sec)
> LMI enq sent 240, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 1023 LMI type is CISCO frame relay DTE
> FR SVC disabled, LAPF state down
> Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts
0
> Last input 05:47:09, output 00:00:02, output hang never
> Last clearing of "show interface" counters 00:39:54
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 354 packets output, 4649 bytes, 0 underruns
> 0 output errors, 0 collisions, 80 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 80 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=u
>
> Thanks for your help in advance.
>
> Georg
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
