Well it's not mentioned if this is a current connection or a new install. If
this is a current connections and looking at the counters it looks like you
cleared it you might not want to change the lmi type. If this is a new
connection then I would try the auto detect feature or find out the correct
lmi
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-----Original Message-----
From: Chris Lemagie [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 10, 2000 2:06 PM
To: Stull, Cory; 'Hans Stout'
Cc: 'ciscostudygroup'
Subject: RE: Frame Relay problem
I'm not seeing any LMI responses from the frame-relay switch in the
interface statistics.
You will most likely have to change your LMI type from CISCO (default) to
ANSI.
Chris Lemagie
Systems Engineer
Cisco Systems
Seattle Commercial Region
(425) 468-0959
[EMAIL PROTECTED]
http://www.cisco.com/
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Stull, Cory
Sent: Tuesday, October 10, 2000 10:13 AM
To: 'Hans Stout'
Cc: 'ciscostudygroup'
Subject: RE: Frame Relay problem
timing or incorrect lmi type.. If its a newer ios with autosensing lmi then
it is probably a timing or circuit issue... Is it a T1 and did you set your
timeslots?
-----Original Message-----
From: Hans Stout [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 10, 2000 1:25 PM
To: [EMAIL PROTECTED]
Subject: Frame Relay problem
Hi colleagues,
I have a problem with my frame relay connection; the serial interface is
up/down, and when I debug the serial interface, I can see that the interface
is constantly trying to restart:23w5d:
Serial5/0: attempting to restart:
--More--
23w5d: Serial5/0(out): StEnq, myseq 4, yourseen 0, DTE down
--More--
23w5d: Serial5/0(out): StEnq, myseq 5, yourseen 0, DTE down
What could be the reason for this ? I'll add the output for the sh int:
Serial5/0 is up, line protocol is down
Hardware is M4T
MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, crc 16, loopback not set
Keepalive set (10 sec)
LMI enq sent 240, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
Last input 05:47:09, output 00:00:02, output hang never
Last clearing of "show interface" counters 00:39:54
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
354 packets output, 4649 bytes, 0 underruns
0 output errors, 0 collisions, 80 interface resets
0 output buffer failures, 0 output buffers swapped out
80 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=u
Thanks for your help in advance.
Georg
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
