http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t1/easyip2.htm#xtocid231010
watch the word wrap
-----Original Message-----
From: FRS [mailto:[EMAIL PROTECTED]]
Sent: 24 October 2000 15:25
To: [EMAIL PROTECTED]
Subject: Dial Backup
Hi all,
I need your input here.
I have 4 remote sites that are connected to HQ via FR as the primary WAN
connection.
I need to have ISDN DDR for all remote sites to HQ in case a FR circuit goes
down ...
On the BRI interface at HQ ... I only need 1 ip address right?
Can I get the HQ router to assign dynamic ip addresses to the remote site's
bri interfaces ...
I would appreciate it if you could point me to references on CCO regarding
this scenario ...
Thanks much,
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
