try "ip un-number command " may help
Sam Li
----- Original Message -----
From: FRS <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 24, 2000 10:25 PM
Subject: Dial Backup
> Hi all,
>
> I need your input here.
> I have 4 remote sites that are connected to HQ via FR as the primary WAN
> connection.
> I need to have ISDN DDR for all remote sites to HQ in case a FR circuit
goes
> down ...
> On the BRI interface at HQ ... I only need 1 ip address right?
> Can I get the HQ router to assign dynamic ip addresses to the remote
site's
> bri interfaces ...
>
> I would appreciate it if you could point me to references on CCO regarding
> this scenario ...
>
> Thanks much,
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
