Jim Healis CCNP, CCDP
Senior Network Administrator
Virata
o: (408) 566-1004
c: (408) 210-8122
-----Original Message-----
From: Healis, Jim
Sent: Wednesday, October 25, 2000 7:57 AM
To: 'Muhammad Faheem'
Subject: RE: 4003 Catalyst Switch, Unable to connect 10mbps links
The Catalyst 4000 Series uses trunking automatically. I found this to be a
problem with Windows clients. Turn channeling and trunking off on each port
that is directly connected to a client, and DHCP should work fine.
Jim Healis CCNP, CCDP
Senior Network Administrator
Virata
o: (408) 566-1004
c: (408) 210-8122
-----Original Message-----
From: Muhammad Faheem [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 25, 2000 1:01 AM
To: "cisco@groupstudy. com (E-mail)"[EMAIL PROTECTED]
Subject: 4003 Catalyst Switch, Unable to connect 10mbps links
<< File: 4003.log >> Hi All
My server and DHCP is connected to a Catalyst 4003 switch. I do not have any
VLAN and I use all default configuration on the switch. When I try to
connect any workstation having 10 Mbps ethernet card to the switch, the
clients do not get a DHCP request from the server.
But the same device when connected to 10/100 3COM hub, which is connected
to the same CAT 4003 switch log on and get the DHCP lease.
I tried changing the duplex and speed config of the respective ports but
nothing helped. Why is it that the device gets a connect from a hub but not
from the switch. I have tried even putting the DHCP server on another port
in other switches or hubs but the problem remained to all devices connected
to the CAT 4003 switch. I am attaching the log file to see my config.
Thanx
<<4003.log>>
Muhammad Faheem
Systems Engineer
Afcomp
Hello : (9714)-3933878 / 3027338
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
