set port host in config mode
Muhammad Asif Rashid wrote:
>
> Hi All
>
> My server and DHCP is connected to a Catalyst 4003 switch. I do not have
> any VLAN and I use all default configuration on the switch. When I try =
> to
> connect any workstation having 10 Mbps ethernet card to the switch, the
> clients do not get a DHCP request from the server.=20
>
> But the same device when connected to 10/100 3COM hub, which is =
> connected
> to the same CAT 4003 switch log on and get the DHCP lease.=20
>
> I tried changing the duplex and speed config of the respective ports =
> but
> nothing helped. Why is it that the device gets a connect from a hub but =
> not
> from the switch. I have tried even putting the DHCP server on another =
> port
> in other switches or hubs but the problem remained to all devices =
> connected
> to the CAT 4003 switch. I am attaching the log file to see my config.=20
>
> Thanx=20
>
> <<4003.log>>=20
>
> Muhammad Faheem
> Systems Engineer
> Afcomp
> Hello : (9714)-3933878 / 3027338
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
