I'm not sure about the 4000 series switches, but if you use version 5.4.1 or
higher on the 6000 series, the command macro set port host will
automatically turn off trunking, and etherchannel; it will also set the port
into spanning-tree port-fast mode.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Healis, Jim
Sent: Wednesday, October 25, 2000 10:58 AM
To: '[EMAIL PROTECTED]'
Subject: FW: 4003 Catalyst Switch, Unable to connect 10mbps links
Jim Healis CCNP, CCDP
Senior Network Administrator
Virata
o: (408) 566-1004
c: (408) 210-8122
-----Original Message-----
From: Healis, Jim
Sent: Wednesday, October 25, 2000 7:57 AM
To: 'Muhammad Faheem'
Subject: RE: 4003 Catalyst Switch, Unable to connect 10mbps links
The Catalyst 4000 Series uses trunking automatically. I found this to be a
problem with Windows clients. Turn channeling and trunking off on each port
that is directly connected to a client, and DHCP should work fine.
Jim Healis CCNP, CCDP
Senior Network Administrator
Virata
o: (408) 566-1004
c: (408) 210-8122
-----Original Message-----
From: Muhammad Faheem [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 25, 2000 1:01 AM
To: "cisco@groupstudy. com (E-mail)"[EMAIL PROTECTED]
Subject: 4003 Catalyst Switch, Unable to connect 10mbps links
<< File: 4003.log >> Hi All
My server and DHCP is connected to a Catalyst 4003 switch. I do not have any
VLAN and I use all default configuration on the switch. When I try to
connect any workstation having 10 Mbps ethernet card to the switch, the
clients do not get a DHCP request from the server.
But the same device when connected to 10/100 3COM hub, which is connected
to the same CAT 4003 switch log on and get the DHCP lease.
I tried changing the duplex and speed config of the respective ports but
nothing helped. Why is it that the device gets a connect from a hub but not
from the switch. I have tried even putting the DHCP server on another port
in other switches or hubs but the problem remained to all devices connected
to the CAT 4003 switch. I am attaching the log file to see my config.
Thanx
<<4003.log>>
Muhammad Faheem
Systems Engineer
Afcomp
Hello : (9714)-3933878 / 3027338
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
