Hi All
My server and DHCP is connected to a Catalyst 4003 switch. I do not have
any VLAN and I use all default configuration on the switch. When I try =
to
connect any workstation having 10 Mbps ethernet card to the switch, the
clients do not get a DHCP request from the server.=20
But the same device when connected to 10/100 3COM hub, which is =
connected
to the same CAT 4003 switch log on and get the DHCP lease.=20
I tried changing the duplex and speed config of the respective ports =
but
nothing helped. Why is it that the device gets a connect from a hub but =
not
from the switch. I have tried even putting the DHCP server on another =
port
in other switches or hubs but the problem remained to all devices =
connected
to the CAT 4003 switch. I am attaching the log file to see my config.=20
Thanx=20
<<4003.log>>=20
Muhammad Faheem
Systems Engineer
Afcomp
Hello : (9714)-3933878 / 3027338
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
