Thanks Jeff.
Actually, I made a mistake, I was talking about E1, I noticed that when I
do a show frame map, the T1s in our network all display their CIRs, but not
the E1s. This is interesting.
Serial3/1.4 (up): point-to-point dlci, dlci 495(0x1EF,0x78F0), broadcast
status defined, active
Serial3/5.1 (up): point-to-point dlci, dlci 201(0xC9,0x3090), broadcast
status defined, active
Jack
""Odell, Jeff"" <[EMAIL PROTECTED]> wrote in message
CD9DBAE1E066D311A8AE00805FA7F57C04FB6D5C@NTMAIL03">news:CD9DBAE1E066D311A8AE00805FA7F57C04FB6D5C@NTMAIL03...
> show frame-relay map should show you the CIR. I will paste the output of
> one of my routers:
>
> Router-R1#sh fra map
> Serial0.1 (up): point-to-point dlci, dlci 500(0x1F4,0x7C40), broadcast, BW
=
> 256000 status defined, active
> Serial0.3 (up): point-to-point dlci, dlci 901(0x385,0xE050), broadcast, BW
=
> 768000 status defined, active
>
> This is a T-1 with two PVC's defined. One is a 256K cir and the other is
a
> 768 CIR. The BW= shows the CIR.
>
> Jeff
>
> -----Original Message-----
> From: Jack Walker [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 08, 2000 12:35 PM
> To: [EMAIL PROTECTED]
> Subject: Re: How to verify the CIR from my router?
>
>
> Jeff,
>
> I am not user taffic shaping, so I am not sure which command can help me
> here, I do have cisco encap, but I tried all those show frame ? commands,
no
> luck.
>
> Thanks
>
> Jack
>
> --
>
> ""Jeff McCoy"" <[EMAIL PROTECTED]> wrote in message
> 8ucblc$msb$[EMAIL PROTECTED]">news:8ucblc$msb$[EMAIL PROTECTED]...
> > I believe that encap frame-relay cisco will display CIR from the cloud
> > switch, other encaps will not.
> >
> > ""Jack Walker"" <[EMAIL PROTECTED]> wrote in message
> > 8ucb78$kpr$[EMAIL PROTECTED]">news:8ucb78$kpr$[EMAIL PROTECTED]...
> > > All,
> > >
> > > Just want to ask how I could verfify/display the CIR of my PVC?
> > >
> > > I know we could throw traffic to verify this, but I just got a new
PVC
> on
> > a
> > > production router(we just add a new PVC on our production T1), so I
can
> > not
> > > push traffic to the production router just to verify the PVC. Is there
> any
> > > other ways to verify the CIR?
> > >
> > > Thanks
> > >
> > > Jack
> > >
> > >
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
