Well is this BW statement based on the bandwith statement entered in the
config for a routing protocol to use? I dont think this command will give
you the acutal CIR of the circuit.
I maybe wrong...let me know.
Sincerely, Raul
-----Original Message-----
From: Odell, Jeff <[EMAIL PROTECTED]>
To: 'Jack Walker' <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
<[EMAIL PROTECTED]>
Date: Wednesday, November 08, 2000 5:09 PM
Subject: RE: How to verify the CIR from my router?
>show frame-relay map should show you the CIR. I will paste the output of
>one of my routers:
>
>Router-R1#sh fra map
>Serial0.1 (up): point-to-point dlci, dlci 500(0x1F4,0x7C40), broadcast, BW
=
>256000 status defined, active
>Serial0.3 (up): point-to-point dlci, dlci 901(0x385,0xE050), broadcast, BW
=
>768000 status defined, active
>
>This is a T-1 with two PVC's defined. One is a 256K cir and the other is a
>768 CIR. The BW= shows the CIR.
>
>Jeff
>
>-----Original Message-----
>From: Jack Walker [mailto:[EMAIL PROTECTED]]
>Sent: Wednesday, November 08, 2000 12:35 PM
>To: [EMAIL PROTECTED]
>Subject: Re: How to verify the CIR from my router?
>
>
>Jeff,
>
>I am not user taffic shaping, so I am not sure which command can help me
>here, I do have cisco encap, but I tried all those show frame ? commands,
no
>luck.
>
>Thanks
>
>Jack
>
>--
>
>""Jeff McCoy"" <[EMAIL PROTECTED]> wrote in message
>8ucblc$msb$[EMAIL PROTECTED]">news:8ucblc$msb$[EMAIL PROTECTED]...
>> I believe that encap frame-relay cisco will display CIR from the cloud
>> switch, other encaps will not.
>>
>> ""Jack Walker"" <[EMAIL PROTECTED]> wrote in message
>> 8ucb78$kpr$[EMAIL PROTECTED]">news:8ucb78$kpr$[EMAIL PROTECTED]...
>> > All,
>> >
>> > Just want to ask how I could verfify/display the CIR of my PVC?
>> >
>> > I know we could throw traffic to verify this, but I just got a new PVC
>on
>> a
>> > production router(we just add a new PVC on our production T1), so I can
>> not
>> > push traffic to the production router just to verify the PVC. Is there
>any
>> > other ways to verify the CIR?
>> >
>> > Thanks
>> >
>> > Jack
>> >
>> >
>> >
>> >
>> > _________________________________
>> > FAQ, list archives, and subscription info:
>> http://www.groupstudy.com/list/cisco.html
>> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>> >
>>
>>
>> _________________________________
>> FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
