Of course, Charles, I'll lay odds you won't get end to end ip connectivity
anyway, given that mess you have created in the middle! :->
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Cthulu, CCIE Candidate
Sent: Monday, November 13, 2000 5:15 PM
To: [EMAIL PROTECTED]
Subject: EIGRP over OSPF and BGP
Hi, all!
By the way, thanks to all who wrote me about where to find a cabinet... got
some good leads out of it!
Y'all know how I love to post messages addressing weird situation and
problems? Usually, it intrigues Chuck L., causing hiim to suspend his
studies while he investigates what the heck I wrote about;)
Anyways, I got another one:
Given:
EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1
I want RTRD and RTRA to become EIGRP peers and do the exchange routing
update thing. Granted, they are not directly connected, and do not share a
common subnet. If I set up a GRE tunnel between D and A, the picture then
becomes:
EIGRP1 RTRA <---tunnel---> RTRD EIGRP1
The tunnel becomes the common network, and therefore, EIGRP should be able
to work. Only thing I am not sure about is the source interfaces for this
tunnel will be different at each end (that is, each source interface will be
in a different subnet). I don't have my rack online to test this out, so
would appreciate any comments.
Thoughts, anyone?
Flames to: [EMAIL PROTECTED]
Charles
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
