On Tue, 21 Nov 2000, sougata maitra wrote:
> i have 2 sites connected with 3620 routers with isdn.
> the isdn cards have nt1 built in.
> i just cant get it to connect.
> can someone please help?
> given beloew are the configs and the results of the debug isdn events and
> debug isdn q931.
> pls help.
your SITE1 BRI0/0 is using 10.30.62.14 (e0/0)
your SITE2 BRI0/0 is using 192.168.1.1 (e0/0)
Whats wrong with this picture?
Now you probably rationalize in your head "but I put dialer map
statments!"..........that doesn't matter, you can do dialer maps, but both
ends of the point to point link must be from the same subnet.
Brian
> ------------------------------------------------------------------------
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname SITE1
> !
> enable password abcd
> !
> username SITE2 password letmethru
> ip subnet-zero
> no ip domain-lookup
> isdn switch-type basic-ni1
> !
> interface BRI0/0
> ip unnumbered Ethernet0/0
> encapsulation ppp
> no logging event subif-link-status
> isdn spid1 20269875240101 6987524
> isdn spid2 20269875250101 6987525
> dialer idle-timeout 300
> dialer map ip 192.168.1.1 name SITE2 broadcast 7272321
> dialer map ip 192.168.1.1 name SITE2 broadcast 7272329
> dialer hold-queue 10
> dialer-group 1
> no fair-queue
> dialer load-threshold 200 either
> ppp authentication chap
> ppp multilink
>
> !
> interface Ethernet0/0
> ip address 10.30.62.14 255.255.255.0
> no logging event subif-link-status
> !
> interface Ethernet1/0
> no ip address
> no logging event subif-link-status
> shutdown
> !
> interface Ethernet1/1
> no ip address
> no logging event subif-link-status
> shutdown
> !
> interface Ethernet1/2
> no ip address
> no logging event subif-link-status
> shutdown
> !
> interface Ethernet1/3
> no ip address
> no logging event subif-link-status
> shutdown
>
> !
> ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 192.168.1.1
> ip route 192.168.1.1 255.255.255.255 bri0/0
> dialer-list 1 protocol ip permit
> !
> line con 0
> password abcd
> login
> line aux 0
> line vty 0 4
> password abcd
> login
> !
> end
> -----------------------------------------------------------------------
>
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname SITE2
> !
> enable password abcd
> !
> username SITE1 password letmethru
> ip subnet-zero
> no ip domain-lookup
> isdn switch-type basic-ni1
> !
> interface BRI0/0
> ip unnumbered Ethernet0/0
> encapsulation ppp
> no logging event subif-link-status
> isdn spid1 20272723210101 7272321
> isdn spid2 20272723290101 7272329
> dialer idle-timeout 300
> dialer map ip 10.30.62.14 name SITE1 broadcast 6987524
> dialer map ip 10.30.62.14 name SITE1 broadcast 6987525
> dialer hold-queue 10
> dialer-group 1
> no fair-queue
> ppp authentication chap
> ppp multilink
>
> no fair-queue
> !
> interface Ethernet0/0
> ip address 192.168.1.1 255.255.255.0
> no logging event subif-link-status
> !
> interface Ethernet1/0
> ip address 192.168.2.1 255.255.255.0
> no logging event subif-link-status
>
> !
> interface Ethernet1/1
> ip address 192.168.3.1 255.255.255.0
> no logging event subif-link-status
>
> !
> interface Ethernet1/2
> ip address 192.168.4.1 255.255.255.0
> no logging event subif-link-status
>
> !
> interface Ethernet1/3
> ip address 192.168.5.1 255.255.255.0
> no logging event subif-link-status
>
>
> !
> ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.30.62.14
> ip route 10.30.62.14 255.255.255.0 bri0/0
> dialer-list 1 protocol ip permit
> !
> line con 0
> password abcd
> login
> line aux 0
> line vty 0 4
> password abcd
> login
> !
> end
> -----------------------------------------------------------------------
>
> SITE1#ping 192.168.1.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
>
> ISDN BR0/0: Outgoing call id = 0x804E
> ISDN BR0/0: Event: Call to 7272321 at 64 Kb/s
> ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x4E
> Bearer Capability i = 0x8890
> Channel ID i = 0x83
> Keypad Facility i = '7272321'
> ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0xCE
> Channel ID i = 0x89
> ISDN BR0/0: received HOST_PROCEEDING.
> ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0xCE
> Cause i = 0x8091 - User busy
> Signal i = 0x04 - Busy tone on
> ISDN BR0/0: received HOST_DISCONNECT
> ISDN BR0/0: Event: Call to 7272321 was hung up.
> ISDN BR0/0: TX -> RELEASE pd = 8 callref = 0x4E
> ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0xCE
> ISDN BR0/0: Outgoing call id = 0x804F
> ISDN BR0/0: Event: Call to 7272321 at 64 Kb/s
> ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x4F
> Bearer Capability i = 0x8890
> Channel ID i = 0x83
> Keypad Facility i = '7272321'.
> ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0xCF
> Channel ID i = 0x89
> ISDN BR0/0: received HOST_PROCEEDING
> ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0xCF
> Cause i = 0x8091 - User busy
> Signal i = 0x04 - Busy tone on
> ISDN BR0/0: received HOST_DISCONNECT
> ISDN BR0/0: Event: Call to 7272321 was hung up.
> ISDN BR0/0: TX -> RELEASE pd = 8 callref = 0x4F
> ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0xCF
> ISDN BR0/0: Outgoing call id = 0x8050
> ISDN BR0/0: Event: Call to 7272321 at 64 Kb/s
> ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x50
> Bearer Capability i = 0x8890
> Channel ID i = 0x83
> Keypad Facility i = '7272321'
> ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0xD0
> Channel ID i = 0x89
> ISDN BR0/0: received HOST_PROCEEDING.
> ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0xD0
> Cause i = 0x8091 - User busy
> Signal i = 0x04 - Busy tone on
> ISDN BR0/0: received HOST_DISCONNECT
> ISDN BR0/0: Event: Call to 7272321 was hung up.
> ISDN BR0/0: TX -> RELEASE pd = 8 callref = 0x50
> ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0xD0
> ISDN BR0/0: Outgoing call id = 0x8051
> ISDN BR0/0: Event: Call to 7272321 at 64 Kb/s
> ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x51
> Bearer Capability i = 0x8890
> Channel ID i = 0x83
> Keypad Facility i = '7272321'.
> ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0xD1
> Channel ID i = 0x89
> ISDN BR0/0: received HOST_PROCEEDING
> ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0xD1
> Cause i = 0x8091 - User busy
> Signal i = 0x04 - Busy tone on
> ISDN BR0/0: received HOST_DISCONNECT
> ISDN BR0/0: Event: Call to 7272321 was hung up.
> ISDN BR0/0: TX -> RELEASE pd = 8 callref = 0x51
> ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0xD1
> ISDN BR0/0: Outgoing call id = 0x8052
> ISDN BR0/0: Event: Call to 7272321 at 64 Kb/s
> ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x52
> Bearer Capability i = 0x8890
> Channel ID i = 0x83
> Keypad Facility i = '7272321'
> ISDN BR0/0: RX <- CALL_PROC pd = 8 callref = 0xD2
> Channel ID i = 0x89
> ISDN BR0/0: received HOST_PROCEEDING.
> Success rate is 0 percent (0/5)
> SITE1#
> ISDN BR0/0: RX <- DISCONNECT pd = 8 callref = 0xD2
> Cause i = 0x8091 - User busy
> Signal i = 0x04 - Busy tone on
> ISDN BR0/0: received HOST_DISCONNECT
> ISDN BR0/0: Event: Call to 7272321 was hung up.
> ISDN BR0/0: TX -> RELEASE pd = 8 callref = 0x52
> ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0xD2
> ----------------------------------------------------------------------
>
> THANKS FOR LOOKING THROUGH ALL THIS.
> ALL REMOTE ACCESS GURUS PLS HELP.
>
> REGARDS
>
>
> _____________________________________________________________________________________
> Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
