i got 3 routers connected by R1 as a framerelay switch ,
using s1/0 on R1 to connect with s1/0 on R2,s1/1 on R1 to connect with s1/0
on R3.
According to some materials,
i should config such on R1:
frame-relay switching
int s1/0
no ip address
encap frame
clock rate 64000
frame intf-type dce
frame route 110 int s1/1 100
int s1/1
no ip address
encap frame
clock rate 64000
frame intf-type dce
frame route 100 int s1/1 110
could anyone tell me the config on r2 and R3 ,
do i need to config any routing protocol or static router on 3 routers ?
I just want to construct a NBMA environment to make a test for ospf .
Thanks.
frank
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]