doh! sorry, your right, I was hitting the crack pipe too hard when I
wrote that :). If you want to manipulate the router-id just use the
"router-id" command to manually set the router-id........
-brian
On Wed, 6 Dec 2000, Paul Fazzone wrote:
> I would have to disagree with this response....The "ip ospf priority" command is
>used to
> determing the DR/BDR Election. Should there be a tie, the router with the higher
>Router
> ID would be chosen.
>
> The Router ID is the highest IP address on the router at the time OSPF was
>configured or
> at the time the router boots up with OSPF configured. My sugestion, if it will fit
>you
> scenario, is to redistribute a default route into rip and let your Cache-flow server
>feed
> off that. This way, you don't have to worry about mutual redistribution
>issues(which are
> a huge no-no anyway) and you can inject the static route into rip from multiple
>spots, so
> you will have redundancy.
>
> Just my $0.02
>
>
> pf
>
> CCNP
>
>
> Brian wrote:
>
> > On Mon, 4 Dec 2000, Anthony Anderson wrote:
> >
> > > Hi all...
> > >
> > > I have a slight problem and I know you people can help. I have a
> > > question regarding OSPF behavior and the loopback address. Our backbone is
> > > running OSPF and we have installed a Cache-Flow server to cache webpages.
> > > The cache-flow does not support OSPF so I attempted to redistribute OSPF
> > > into RIP. I use a private address for the loopback on all of our routers
> > > and the advertisement to the cacheflow shows the loopback as the interface
> > > the advertisement is coming from. So, say a network of 192.168.5.1 lies of
> > > router A's serial port, the loopback address of that router is 10.0.2.2, and
> > > the ethernet interface is 172.16.0.2 - note - all devices share a common
> > > ethernet segment. The route in the cache-flow is: 192.168.5.1 via 10.0.2.2
> > > even though the ethernet address is a totally different network. Can someone
> > > explain why this is happening and what I can do about it? I have static
> > > routes configured now, but I would like to make it dynamic if possible.
> >
> > set "ip ospf priority 2" on all interfaces except the one that is on the
> > network which is "known", on that one set priority to 1. This will force
> > the router id to be that interface
> >
> > Brian
> >
> > >
> > >
> > > Thanks,
> > > --
> > > Anthony Anderson CCNA
> > > Manager-Data Network Engineering
> > > Bluegrass Cellular, Inc.
> > >
> > > "Man's life, as required by his nature, is not the life of a mindless brute,
> > > of a looting thug or a mooching mystic,
> > > but the life of a thinking being -- not life by means of force or fraud,
> > > but life by means of achievement." - Ayn Rand
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > -----------------------------------------------
> > Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
> > Network Administrator
> > ShreveNet Inc. (ASN 11881)
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]