Dear All,
One of my friends in egroups suggest me to contact TAC to solve our Cisco
1005 Series which have problem but i also need oone of you in Cisco Group
Study to help me. I dont know exactly what is the problem, is it hardware or
software problem or maybe..bugs of cisco. Here, i send copy of error message
when i reload the router
Queued messages:
*** EXCEPTION ***
software forced crash
program counter = 0x20ba270
status register = 0x2704
vbr at time of exception = 0x0
monitor: command "boot" aborted due to exception
monitor: command "boot" aborted due to exception
System Bootstrap, Version 5.3.2(9) [vatran 9], RELEASE SOFTWARE (fc1)
Copyright (c) 1994 by cisco Systems, Inc.
C1000 processor with 8192 Kbytes of main memory
program load complete, entry point: 0x18060, size: 0xd5980
%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be correctly
under
stood.
%QUICC-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
Failed to change line 1's speedprogram load complete, entry point:
0x2004000, si
ze: 0x1679fa
Self decompressing the image : #############################################
[OK
]
.....
8K bytes of non-volatile configuration memory.
2048K bytes of processor board PCMCIA flash (Read/Write)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/router-confg (Timed out)
%Error opening tftp://255.255.255.255/router.cfg (Timed out)
router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 1005 Software (C1005-QY-M), Version 12.0(3), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 08-Feb-99 18:29 by phanguye
Image text-base: 0x02004000, data-base: 0x022D226C
ROM: System Bootstrap, Version 5.3.2(9) [vatran 9], RELEASE SOFTWARE (fc1)
BOOTFLASH: 1000 Bootstrap Software (C1000-RBOOT-R), Version 10.3(9), RELEASE
SOF
TWARE (fc1)
router uptime is 4 minutes
System restarted by error - software forced crash, PC 0x20BA270
System image file is "flash:c1005-qy-mz_120-3.bin"
cisco 1000 (68360) processor (revision @) with 7680K/512K bytes of memory.
Processor board ID 15293326
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 terminal line(s)
8K bytes of non-volatile configuration memory.
2048K bytes of processor board PCMCIA flash (Read/Write)
Configuration register is 0x2102
This error is always there when i access to the router. I really appreciate
if you can give me some suggestions to solve this problem.
Rgds,
Erwin Novriyanto
Network Engineer/ITD
Phone. 7251142 Ext. 302
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
