It worked. Thanks

Cisco4000#copy run tftp
Address or name of remote host []? 192.168.0.109
Destination filename [running-config]? tftp://192.168.0.109/cisco4000/hello
!!
754 bytes copied in 2.224 secs (377 bytes/sec)
Cisco4000#


-----Original Message-----
From: Andy Walden [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 13, 2000 8:16 AM
To: Pierre-Alex
Cc: [EMAIL PROTECTED]
Subject: RE: TFTP Subdirectories



Unless you have another subdirectory under cisco called cisco then, remove
the work cisco from the tftp filename you give.

Andy

On Wed, 13 Dec 2000, Pierre-Alex wrote:

> I am using Cisco TFTP. In the field: TFTP Server Root directory ,  I have
> Z:\1.OS\Cisco (Z: is a mapped drive.)
>
> -----Original Message-----
> From: Andy Walden [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 13, 2000 7:50 AM
> To: Pierre-Alex
> Cc: [EMAIL PROTECTED]
> Subject: RE: TFTP Subdirectories
>
>
>
> Are you sure that your tftpboot directory is /cisco on the machine? Is the
> machine unix or windows? make sure the permissions are 777 if its
> unix. Also, make sure you have enough room in your flash for the file. dir
> should show you.
>
> andy
>
> On Wed, 13 Dec 2000, Pierre-Alex wrote:
>
> > SCENARIO:
> >
> > The root of my TFTP server is a folder called Cisco
> > Cisco has 2 subfolders: Cisco4000 and Cisco2500
> > I want to copy my running configuration to the Cisco4000 subfolder
> >
> > WHAT I DID:
> >
> > Cisco4000#copy run tftp
> > Address or name of remote host []? 192.168.0.109
> > Destination filename [running-config]? /cisco/4000/running-config
> > TFTP: error code 2 received - File cannot be
> > created^ExmW___________KJ^BxO@@@@@D
> > ^EPJ
> >
> > %Error opening tftp://192.168.0.109//cisco/4000/running-config
(Undefined
> > error)
> >
> > QUESTION:
> >
> > If this can be done, what should I type to make it work
> >
> >
> > Thank you.....
> >
> >
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Pierre-Alex
> > Sent: Tuesday, December 12, 2000 6:45 PM
> > To: Andy Walden
> > Cc: [EMAIL PROTECTED]
> > Subject: RE: TFTP Subdirectories
> >
> >
> > Thanks
> >
> > -----Original Message-----
> > From: Andy Walden [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, December 12, 2000 4:14 PM
> > To: Pierre-Alex
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: TFTP Subdirectories
> >
> >
> >
> > I don't believe you can browse or change directories with tftp. You can
> > specify a subdirectory when you refer to the filename though, such as:
> >
> > /tftp/7507/ios/rsp-pv-mz.120-9.S
> >
> > Remember to keep your permissions accessible.
> >
> > andy
> >
> > > I would like to store the IOS of my routers and switch in subfolders
so
> > that
> > > they are more organized.
> > >
> > > 0) can this be done?
> > > 1) what command will let me browse the content of my TFTP server
folders
> > > 2) what command will start the upload process from a subdirectory
> > >
> > > Thank you
> > >
> > > Pierre-Alex
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
>


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to