Hi,
I thouight a similar one came up a few days ago.
Look at if the WS-X5224 can support etherchannel. I think you will find "NO" is the
answer. This will probably cause the ports not to come up as you might expect.
Go to the www.cisco.com and do a search on the WS-X5224 and check on what it supports.
I think it was about the eighth or so paper down in the choices.
Teunis,
Hobart, Tasmania
Australia
On Tuesday, December 26, 2000 at 01:10:49 PM, Fugett. Brian K. wrote:
> Our RSM's are in slot 8. Check these things:
>
> 1: What are your interfaces showing. ie. DOWN DOWN; UP DOWN etc.
> The fist and most important thing is to get your intefaces up.
>
> 2: You do not need an extra EIGRP process on all VLANS. You need to have
> your EIGRP stated in your global config.
>
> Config t
> Router EIGRP 1
> network 192.170.0.0
>
> > -----Original Message-----
> > From: Mark Krysinski [SMTP:[EMAIL PROTECTED]]
> > Sent: Tuesday, December 26, 2000 1:27 PM
> > To: viathin; [EMAIL PROTECTED]
> > Subject: RE: problems configuring a 5500 chasis please help
> >
> > Are you sure you can plug the RSM into slot #2. I remember someone
> > telling
> > me to have it in slot 12. Please let me know if this is the case, our
> > 5500
> > uses slot 2 for a back up sup III module and slot 12 for the RSM with Vip
> > module.
> >
> > Hope this helps.
> >
> > Mark
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > viathin
> > Sent: Wednesday, December 20, 2000 6:59 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: problems configuring a 5500 chasis please help
> >
> >
> > I tried plugging in an active switch into vlan 100 and it still was
> > saying
> > that the vlan was not active or at least it appeared that way and i
> > couldn't
> > ping it.
> >
> > ""Brian Gleason"" <[EMAIL PROTECTED]> wrote in message
> > 91qoiu$1kf$[EMAIL PROTECTED]">news:91qoiu$1kf$[EMAIL PROTECTED]...
> > >
> > > Try plugging in a client machine into each of your vlans. I had this
> > > problem with a 6509 and once the client link state came up, the
> > interface
> > > came up.
> > >
> > >
> > > ""viathin"" <[EMAIL PROTECTED]> wrote in message
> > > 91plqc$2ti$[EMAIL PROTECTED]">news:91plqc$2ti$[EMAIL PROTECTED]...
> > > > I'm having trouble configuring one router was wondering if you could
> > help
> > > >
> > > > We are configuring a 5500 Chassis with:
> > > > > >
> > > > > > 1) WS X5530 Supervisor Engine (Slot 1)
> > > > > > 2) WS X5302 Route Switch Module (Slot 2)
> > > > > > 3) WS 5224 Switch ports (24 copper ports)
> > > > > >
> > > > > > A)
> > > > > > We have defined:
> > > > > > VLAN 100 on 3/1-4
> > > > > > VLAN 200 on 3/5-8
> > > > > > VLAN 300 on 3/9-12
> > > > > > VLAN 500 on 3/21-24
> > > > > > B)
> > > > > > We have created the interfaces on the RSM:
> > > > > > Config Terminal:
> > > > > > 1) Interface vlan 100
> > > > > > ip address 192.170.1.1 255.255.255.0
> > > > > > 2) Interface vlan 200
> > > > > > ip address 192.170.2.1 255.255.255.0
> > > > > > 3) Interface vlan 300
> > > > > > ip address 192.170.3.1 255.255.255.0
> > > > > > 5) Interface vlan 500
> > > > > > ip address 192.170.5.1 255.255.255.0
> > > > > >
> > > > > > Performed a no shutdown command on all interfaces.
> > > > > >
> > > > > > C)
> > > > > > We implemented "eigrp 1" as the routing protocol using:
> > > > > > Interface vlan 100
> > > > > > router eigrp 1
> > > > > > network 192.170.1.0
> > > > > > network 192.170.2.0
> > > > > > network 192.170.3.0
> > > > > > network 192.170.5.0
> > > > > > The above was repeated for all vlans (100,200,300,500)
> > > > > > D)
> > > > > > 1) Can not ping any vlan interfaces.
> > > > > > 2) Performed a "Show Interface" and it shows all interfaces are
> > down.
> > > > > >
> > > > > >
> > > > > > Thanks for looking into this and we appreciate any insight on this
> > > > > > problem.
> > > > > >
> > > > > Craig.
> > > >
> > > >
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > >
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
