routerb(config)#
routerb(config)#service password-recovery
^
% Invalid input detected at '^' marker.
routerb(config)# no service password-recovery
^
% Invalid input detected at '^' marker.
routerb(config)#
routerb(config)#
Duck
----- Original Message -----
From: Eric Fisher <[EMAIL PROTECTED]>
To: Taylor, Don <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, December 19, 2000 1:25 PM
Subject: Re: Pwd Question
> RE: Pwd QuestionDon,
>
> It is an undocumented command.
>
>
>
> ----- Original Message -----=20
> From: Taylor, Don=20
> To: 'Eric Fisher' ; [EMAIL PROTECTED]=20
> Sent: Tuesday, December 19, 2000 4:13 PM
> Subject: RE: Pwd Question
>
>
> I searched on CCO and can find no record of "no service =
> password-recovery"; I don't believe there is such an animal. You're not =
> using an older version of HyperTerminal, are you? The old version didn't =
> send the break signal properly. You can try the newer version or a =
> different terminal emulator altogether if this is the case.
>
> - Don=20
>
> -----Original Message-----=20
> From: Eric Fisher [mailto:[EMAIL PROTECTED]]=20
> Sent: Tuesday, December 19, 2000 12:54 PM=20
> To: [EMAIL PROTECTED]=20
> Subject: Pwd Question=20
>
>
>
> I have this router that someone must have entered no service=20
> password-recovery and I don't have the password. You are unable to =
> get into=20
> Rommon to change the confreg. Is there a work around this or do I =
> have to=20
> call Cisco.=20
>
> Thanks=20
>
>
>
> _________________________________=20
> FAQ, list archives, and subscription info: =
> http://www.groupstudy.com/list/cisco.html=20
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] =
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]