from my understanding, "inactive" means the line to the switch is fine, but
the end to end connectivity is a problem
As for the log messages, maybe a form of lmi auto sensing????
-----Original Message-----
From: Frank [mailto:[EMAIL PROTECTED]]
Sent: 02 January 2001 10:36
To: [EMAIL PROTECTED]
Subject: problem on FR
I am configuring a multichannel E1 board on 7513 to connect with a FR net.
when i use SH FRAME PVC ,i got the the PVC status is "deleted " or
"inactive"
what acturally does it mean ?
as far as i know ,"deleted" means the line between router and FR switch is
not OK,
and "inactive" means OK.
i also got the following infor when i unplug the line from the router and
then plug it back.
(i opened deb frame packet and deb frame event on)
serial4/0/0:0 broadcast search
serial4/0/0:0 encaps failed on broadcast for link 7(IP)
what does it mean?
Any help is appreciated.
Frank
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]