PVC deleted - your router does not see the DLCI that you have configured (
Check to see if you are getting lmi from the switch, if yes then check your
DLCI's or call telco)

PVC inactive - your router sees a DLCI on the frame relay but something is
stopping it from becomming active (check the configutation on both ends )

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
news.groupstudy.com
Sent: Wednesday, January 03, 2001 1:16 AM
To: [EMAIL PROTECTED]
Subject: Re: problem on FR



   What is the status of the main interface you are configuring this
Frame-relay subinterface on?

   I have typically seen a "deleted" status for a PVC to mean that the PVC
within the frame-relay net you are connecting to is not built.


"Frank" <[EMAIL PROTECTED]> wrote in message
92s7rc$4f2$[EMAIL PROTECTED]">news:92s7rc$4f2$[EMAIL PROTECTED]...
> I am configuring a multichannel E1 board on 7513 to connect with a FR net.
> when i use SH FRAME PVC ,i got the the PVC status is "deleted " or
> "inactive"
> what acturally does it mean ?
> as far as i know ,"deleted" means the line between router and FR switch is
> not OK,
> and "inactive" means OK.
> i also got the following infor when i unplug the line from the router and
> then plug it back.
> (i opened deb frame packet and deb frame event on)
>
> serial4/0/0:0 broadcast search
> serial4/0/0:0 encaps failed on broadcast for link 7(IP)
>
> what does it mean?
>
> Any help is appreciated.
>
> Frank
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to