use the "no keepalives" if you are using back to back connections -
otherwise you need to have a frame relay switch configured
Andrew
-----Original Message-----
From: Manny Akintayo [mailto:[EMAIL PROTECTED]]
Sent: 03 January 2001 15:25
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay question ?
Do you have a router configured as a frame switch ?????
It seems to me that you are missing the most important part of the puzzle.
For the frame relay encapsulation to work,The third router that sits in the
middle of
your setup will be configured as a fram switch .with the correct route map
statements .
Manny
mindiani mindiani wrote:
> Want to get to setup frame relay on my two routers connectected (2x 2501)
> back-to-back with a DTE/DCE cables. When both routers boot up I could see
> the routing table with "sh ip route" and after 30 secondes the protocol on
> the serial interfaces go down. Can you help
>
> Here is the sample config:
>
> Router1:
>
> interface Serial0
> clockrate 64000
> bandwidth 64
> ip address 10.0.2.5 255.255.255.252
> no ip directed-broadcast
> encapsulation frame-relay
> frame-relay lmi-type cisco
> frame-relay interface-dlci 100
>
> Router2:
>
> interface Serial0
> bandwidth 64
> ip address 10.0.2.6 255.255.255.252
> no ip directed-broadcast
> encapsulation frame-relay
> frame-relay lmi-type cisco
> frame-relay interface-dlci 200
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]