Actually, you need to configure the device to be more like a DTE-DCE
configuration... ie, clockrate

"Clayton Price" <[EMAIL PROTECTED]> wrote in message
930m98$ngm$[EMAIL PROTECTED]">news:930m98$ngm$[EMAIL PROTECTED]...
> Yout turn on frame relay switching on one of the routers.
>
> Clayton Price
>
> ""Kenneth Lorenzo"" <[EMAIL PROTECTED]> wrote in message
> 930kdk$kap$[EMAIL PROTECTED]">news:930kdk$kap$[EMAIL PROTECTED]...
> > this is weird but I've actually seen configurations where there are back
> to
> > back connections simulating a Frame network (DTE-DCE). I'm sure it
doesn't
> > work exactly like a frame cloud (since there is no cloud) but the guy
was
> > able to bring both interfaces up...
> >
> > "Kelly D Griffin" <[EMAIL PROTECTED]> wrote in message
> > 069c01c075bc$b9b5ba50$[EMAIL PROTECTED]">news:069c01c075bc$b9b5ba50$[EMAIL PROTECTED]...
> > > Where is the DCE device that acts as your FR switch?
> > >
> > > Kelly D Griffin, CCNA
> > > Network Engineer
> > > Kg2 Network Design
> > > http://www.kg2.com
> > >
> > >
> > > ----- Original Message -----
> > > From: "mindiani mindiani" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Wednesday, January 03, 2001 8:06 AM
> > > Subject: Frame-Relay question ?
> > >
> > >
> > > > Want to get to setup frame relay on my two routers connectected (2x
> > 2501)
> > > > back-to-back with a DTE/DCE cables. When both routers boot up I
could
> > see
> > > > the routing table with "sh ip route" and after 30 secondes the
> protocol
> > on
> > > > the serial interfaces go down.  Can you help
> > > >
> > > > Here is the sample config:
> > > >
> > > > Router1:
> > > >
> > > > interface Serial0
> > > > clockrate 64000
> > > > bandwidth 64
> > > > ip address 10.0.2.5 255.255.255.252
> > > > no ip directed-broadcast
> > > > encapsulation frame-relay
> > > > frame-relay lmi-type cisco
> > > > frame-relay interface-dlci 100
> > > >
> > > >
> > > > Router2:
> > > >
> > > > interface Serial0
> > > > bandwidth 64
> > > > ip address 10.0.2.6 255.255.255.252
> > > > no ip directed-broadcast
> > > > encapsulation frame-relay
> > > > frame-relay lmi-type cisco
> > > > frame-relay interface-dlci 200
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> >
_________________________________________________________________________
> > > > Get Your Private, Free E-mail from MSN Hotmail at
> > http://www.hotmail.com.
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > >
> > > ____________________________________________
> > > http://1cis.com
> > > Free E-mail Servers with unlimited mailboxes
> > > 1st Class Internet Solutions
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to