Hi,
I trust this is not the complete bri set-up.
As well as the Username/Hostname validity I would also suggest a dialer-group
dialer-list combination might also do some good.
Just a thought
Teunis,
Hobart, Tasmania
Australia
On Friday, January 05, 2001 at 07:10:41 PM, ahmad wrote:
> Dear all,
>
> i am setting up an end-to-end isnd connection between two routers using CHAP
> athuentication.i seem to make a connection but cant ping even the local side
> the show ip route shows it as directly connected interface,when i do show
> int bri 0 i see (spoofing)what actually does it mean and how to get rid of
> it ??i have checked the configurations and searched on net a lot
> configuration seems alright.if possible can someone send me a practical
> working config (offcourse ips and passwords omitted).??
>
> i realy would appreciate it.following is a general skecth just for refernce.
>
>
> following is the configuration
>
> Router 1:
>
> hostname 3600-1
> username 2600-1 password google
>
> int bri 0
> ip address 10.10.10.1 255.255.255.0
> encapsulation ppp
> dialer map ip 10.10.10.2 name 2600-1
> ppp authentication chap
> -----
>
> Router 2:
>
> hostname 2600-1 password google
>
> int bri 0
> ip address 10.10.10.2 255.255.255.0
> encapsulation ppp
> dialer map ip 10.10.10.1 name 3600-1 1267126
> ppp authentication chap
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
