Dennis,
Since your telnetting into the routers, you need to have the vty line with
the exec timeout as well. You are going in through a virtual telnet session
even though you are connected to a console port (kinda like telnetting into
a router across an ethernet port) . So make sure on the target routers
that you have the vty set with the timeout as well.
Don
-----Original Message-----
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 19, 2001 2:34 PM
To: Barnhill, Don
Subject: RE: Exec-timeout
Thanks, though I'm thinking since the reverse telnet is being run on the
Terminal Server the router only knows I'm coming in through the console
port, so I should set it on Con0, right? Anyway, I'm testing it now.
Thanks...
- Dennis
-----Original Message-----
From: Barnhill, Don
To: 'Dennis Laganiere'
Sent: 1/19/01 1:22 PM
Subject: RE: Exec-timeout
Dennis,
Either use no exec-timeout or exec-timeout 0 0 (which it sounds like you
are)
Also you are telneting (reversely) to the router, so make sure it is on
your
vty line.
Don
-----Original Message-----
From: Dennis Laganiere [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> ]
Sent: Friday, January 19, 2001 2:00 PM
To: '[EMAIL PROTECTED]'
Subject: Exec-timeout
I'm using terminal server to get to my lab routers and every time I go
back
the mandatory 10 minutes has gone by and I need to log in again. I
thought
the command to extend this time was exec-timeout (which I put on con 0),
but
it doesn't seem to be changing. What am I doing wrong? It's not an
earth-shattering thing, just a nuisance. Thanks...
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
<http://www.groupstudy.com/list/cisco.html>
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
