Don,
I would have to disagree with that... When you go from the terminal server
you are going out of an asynchronous port into the console port of another
router... You may be telnetted into the terminal server but that is the
only actual telnet session happening. I've been wrong before (more than
most) but I'm thinkin I'm correct on this one.
Cory
-----Original Message-----
From: Barnhill, Don [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 19, 2001 4:12 PM
To: 'Dennis Laganiere'
Cc: '[EMAIL PROTECTED]'
Subject: RE: Exec-timeout
Dennis,
Since your telnetting into the routers, you need to have the vty line with
the exec timeout as well. You are going in through a virtual telnet session
even though you are connected to a console port (kinda like telnetting into
a router across an ethernet port) . So make sure on the target routers
that you have the vty set with the timeout as well.
Don
-----Original Message-----
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 19, 2001 2:34 PM
To: Barnhill, Don
Subject: RE: Exec-timeout
Thanks, though I'm thinking since the reverse telnet is being run on the
Terminal Server the router only knows I'm coming in through the console
port, so I should set it on Con0, right? Anyway, I'm testing it now.
Thanks...
- Dennis
-----Original Message-----
From: Barnhill, Don
To: 'Dennis Laganiere'
Sent: 1/19/01 1:22 PM
Subject: RE: Exec-timeout
Dennis,
Either use no exec-timeout or exec-timeout 0 0 (which it sounds like you
are)
Also you are telneting (reversely) to the router, so make sure it is on
your
vty line.
Don
-----Original Message-----
From: Dennis Laganiere [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> ]
Sent: Friday, January 19, 2001 2:00 PM
To: '[EMAIL PROTECTED]'
Subject: Exec-timeout
I'm using terminal server to get to my lab routers and every time I go
back
the mandatory 10 minutes has gone by and I need to log in again. I
thought
the command to extend this time was exec-timeout (which I put on con 0),
but
it doesn't seem to be changing. What am I doing wrong? It's not an
earth-shattering thing, just a nuisance. Thanks...
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
<http://www.groupstudy.com/list/cisco.html>
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]