This means you made the initial configuration in an older IOS version (held
in NVRAM) & the router is more of less reminding you that not all commands
will be understood from that older code. This is a default & does not
always mean you will have issues. Actually- I goof with the IOS versions
all the time in my home lab & can count on a coupel of fingers- how many
times I've had issue dealing with new/old commands.
Phil
----- Original Message -----
From: "Michael Ibidunni" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 14, 2001 9:22 PM
Subject: %SYS-4-CONFIG_NEWER
>
> Folks,
>
> I was wondering if someone can assist me in solving this problem or
direct me to a link on
> cisco's web site to solve this problem. I upgraded the IOS on my 2513 from
11.1 to 12.0 and after
> that whenever I start the router it comes up with the following message
:%SYS-4-CONFIG_NEWER:
> Configurations from version 12.0 may not be correctly under
> stood. From my search on cco, I upgraded the boot roms which I got from
cisco, but that didn't
> solve the problem, HELP.
>
> Thanks in advance
>
>
>
> =====
> Michael Ibidunni
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
