This occurs after a software upgrade or downgrade to inform you that
configurations may not be 100% compatible between versions. You can
normally get rid of the message by saving the configuration file into NVRAM
under the new IOS. You should probably find that after doing a 'copy run
start' and 'reload', that the message no longer appears on boot.
Regards
Adam
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Michael Ibidunni
> Sent: February 14, 2001 4:22 PM
> To: [EMAIL PROTECTED]
> Subject: %SYS-4-CONFIG_NEWER
>
>
>
> Folks,
>
> I was wondering if someone can assist me in solving this problem or
> direct me to a link on
> cisco's web site to solve this problem. I upgraded the IOS on my 2513 from
> 11.1 to 12.0 and after
> that whenever I start the router it comes up with the following message
> :%SYS-4-CONFIG_NEWER:
> Configurations from version 12.0 may not be correctly under
> stood. From my search on cco, I upgraded the boot roms which I got from
> cisco, but that didn't
> solve the problem, HELP.
>
> Thanks in advance
>
>
>
> =====
> Michael Ibidunni
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
