I have scoured all the books I have and CCO for an answer but keep coming up
dry. So I hope someone has an answer. It's not an ovely complex scenario,
and I would think that someone else has tripped across it before.
I have a client that requires 24x7 Internet Access. The have a DSL Modem
plugged into a 2611 (Eth 0/0) and a BRI NT1 WIC for backup. I can get it
all to work, in terms of floating static routes and connectivity, but the
catch is that they use a private address space and require the use of NAT.
NAT doesn't appear to fail over. Actually it does but it continues to use
the address of the Ethernet 0/0 interface, (Same for a Tunnel interface that
they have). Is there a way to set NAT up so that the address will change to
the new address assigned to the Dialer Interface? Maybe same for the
Tunnel. I was thinking that a Loopback interface may be required but keep
failing to see the appropriate usage...
Any ideas? Like I said, it's not hugely complex and I'm sure that other
people have tripped across it, but I don't see it documented anywhere.
--
Kevin L. Kultgen
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
