i think he said config. that goes to nvram
not ios if he didn't have enough room to load two images he could erase the
old. that goes to flash
i believe there is a difference
every time the router recycles the image loads but probaly all his config
changes go away (i.e. ip addr)
I think you may have some bad memory spence
Don
----- Original Message -----
From: The.Rock <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Monday, March 19, 2001 9:03 AM
Subject: Re: 2500 wont save config
> It might not save due to lack of mem. Make sure you have enough room to
hold
> both the current IOS as well as the one your trying to upgrade. Otherwise
> you will need to delete one of them first. Being that your on IOS 10.3
tells
> me that probably you don't have enough memory.
>
> And I see your title....." LAN Engineer". I'm not picking on you, but it
> just seems that for the question you just asked, its not one that someone
> would ask in your position. This goes back to the paper cert thing!!!!
>
>
> ""Plantier, William (Spencer)"" <[EMAIL PROTECTED]> wrote in
> message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I have a 2500 router with 10.3 IOS and I cant save the config. Any
> > suggestions?
> >
> > Wm. Spencer Plantier
> > LAN Engineer
> > (919) 474-1300 ext 0873 Office
> > (919) 474-1056 Fax
> > (919)696-8848 Cell
> > [EMAIL PROTECTED]
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
